LUPIT POLE CLASSIC G2/DIAMOND G2 SLOPE CEILING MOUNT
Many homes have sloped ceiling areas — and therefore difficult to install dance poles.
LUPIT POLE CLASSIC G2/DIAMOND G2 SLOPE CEILING MOUNT is the perfect solution and can be used for any ceiling inclination. It must be permanently fixed to the ceiling for maximum safety and stability of the pole.
Since it is designed to absorb the flexibility of the pole during exercise, the pole will maintain excellent spin performance.
FEATURES:
Easy to install
High quality
Made in the EU
 
LUPIT POLE SLOPE CEILING MOUNT can be only used with LUPIT POLE CLASSIC/DIAMOND
 
Note:
LUPIT POLE SLOPE CEILING is made to be used when the ceiling is not parallel to the floor and can be used for any inclination. It must be permanently fixed to the ceiling to provide maximum safety and stability of the pole. Since it absorbs the flexibility of the pole during exercise, the pole will maintain excellent spin performance. 
Before drilling:
Mark the holes to be drilled on the ceiling.
Make sure there are no installations (electricity, water lines, gas lines) or other dangerous obstacles.
We recommend LUPIT POLE SLOPE CEILING MOUNT to be installed only on the concrete ceiling. If the ceiling is made of any other material or plaster ceiling-wall, construction should be checked by an expert and extra reinforced if needed.
All four holes must be used for fixing the LUPIT POLE SLOPE CEILING MOUNT.
To calculate the pole assembly, measure the vertical distance from the middle point of the LUPIT POLE SLOPE CEILING MOUNT to the floor. Reduce the distance measured by 50-60mm, and use that reduced measure in the LUPIT POLE height calculator for proper installation.
Use the LUPT POLE CLASSIC/DIAMOND Instructions for use or Installation video for installation.
Be extra careful at the point of tightening the pole. Make sure the pole is not over-tightened, which can cause damage to the ceiling.
Before every pole exercise, check the stability of the pole by shaking it hard.